I don't think they can even force me to repair the box, let alone wiring.
Electric service
Return to table of contents Primary service overload protection type: Circuit breakers
Service amperage (amps): 100
Location of main service panel: Kitchen
Sub panels: Not present
Location of main disconnect: Breaker at bottom of main service panel
Service conductor material: Aluminum
Service ground: Driven rod in ground
Main disconnect rating (amps): 100
Branch circuit wiring type: Non-metallic sheathed
9)
One or more circuit breakers are "double tapped", where 2 or more wires are clamped in a circuit breaker terminal, and the circuit breaker is only designed for 1 wire. This is a safety hazard since wires may loosen and cause arcing, sparking and fires. Recommend having a qualified, licensed electrician evaluate and repair.
Photo 32 10)
This property has one or more Federal Pacific Electric brand service or sub panels that uses "Stab-Lok" circuit breakers. These circuit breakers are a hazard and can fail, leading to electrical fires. Some double-pole (240-Volt) FPE circuit breakers and possibly also some single-pole units may not work. Some studies indicate that there is a failure rate close to 50% for FPE 2-pole breakers. Recommend considering replacing any and all FPE panels, and that a qualified, licensed electrician thoroughly evaluate the panel(s). If the client decides not to replace the FPE panel(s), recommend installing a smoke detector above the panel(s).
For more information visit:
http://www.inspect-ny.com/fpe/fpepanel.htm
Photo 19
Photo 20
Photo 21
